Bentel Security KYO 4M User Manual

25

Operating from a Keypad
Enable/Disable Buzzer
This option will allow you to enable the keypad buzzer to signal the following even-
ts:
 Entry Time
 Exit time
 Violation of ‘Chime’ zones
To enable/disable an LCD keypad buzzer, proceed as follows:
1. From the User Menu, using key
C or D, scroll for the
‘En./Dis. Keyp. Buzz. option then press
ENTER.
2. Press
ON to enable or OFF to disable the Buz-
zer.
3. Press
ENTER to confirm and go back to step 1.
To enable/disable an LED keypad buzzer, proceed as follows:
1. Access the User Menu.
Code PIN + ENTER
The P indicator will blink.
2. Press 5 to toggle the status — Enable Ö Disable (refer to Table 13).
3. Press ENTER to confirm, or ESC to quit and, in both cases, exit the Menu.
USER MENU ßà
En/DisKeyp.Buzz.
En/DisKeyp.Buzz.
ON <OFF>
LCD Keypads
LED Keypads

/(' 0HDQLQJ

.



   

Bentel Security KYO 4M Specifications

General

Brand	Bentel Security
Model	KYO 4M
Category	Control Unit
Language	English