34
Multifunction Control Panel
View Logger
This option will allow you to view all the alarms recorded in the system memory. The
Logger is circular and holds 256 events (128 on Kyo4/8/8G Models). Once the
Logger is full, the oldest events will be deleted to make space for new events.
The following information will be provided for each event:
z Ev. - Event number
z Date/Time - Date and Time of the event
z Event Type - Event description
z Identifier - Event details
To access the Event Logger from an LCD keypad, proceed as follows:
1. From the Main User Menu, using key
C or D,
scroll the menu for the View Logger option, then
press
ENTER.
2. The top line of the Logger shows the number of the
last event, and the bottom line the event type.
To view the Events list, use keys:
A or B to scroll the list for the required event;
C or D to view the date and time, and the event
identifier.
3. Press
ESC to go back to step 1.
This option is not available on LED keypads.
USER MENU ßà
View Logger
Event 115 áâßà
Part. disarm.
Event 035 áâßà
Recogniz.code
Event 035 áâßà
User Code 1
Event 035 áâßà
10/09/2002 17:45
LCD Keypads
LED Keypads
To Next Page
Loading...
Need help?
General
