5
®®
Introduction
INTRODUCTION
The Control Panel
This Manual is designed for anyone using a Control panel from the KYO range.
Most of the features described in this Manual are included on all KYO Control
panels. However, some features are included on certain models only, in such
cases, the name of the Control panel will be specified.
Your Installer has set up your system with your premises in mind. You may not
need all the features descibed in this Manual, therefore, your Installer will have
programmed only the features you need.
The functions on KYO4 and KYO8 (4 Partition Control panels) and KYO32 (8
Partition Control panel) can be controlled from Keypads and Digital Readers
(see Figures 1, 2, 3 and 4).
This Manual provides step-by-step instructions for each function.
This Control panel has an intergrated Digital Communicator, that allows your
system to send Alarm, Trouble and Emergency messages to the Central Station,
This feature also allows your Installer to carry out remote maintenance (Teleser-
vice).
If your system is equipped with an NC2/VOX Voice board (accessory item),
your Digital communicator will be able to send voice messages.
Series 32 Control panels accept Vector/RX Receivers. Installation of a Vector/
RX Receiver will allow the control panel to manage Wireless security devices
(Detectors, Magnetic Contacts, etc.) and Wireless Keys.
Read this guide thoroughly to learn how to use your system. See the Glossary to
learn about the words used in the instructions.
About Your Security
System
Controlling Your
System
The Digital
Communicator
The NC2/VOX Voice
Board
The Vector/RX
Wireless Receiver
(for KYO Series 32)
To Next Page
Loading...
