30
Print Preview
Previews printing results based on Print Setup.
Print Setup
Opens a print dialog box to adjust printer settings.
Recent File
Provides a list of recently saved files for convenient access.
Exit
Closes the Audia
®
software program.
Also provides prompt to save the current
Audia system design file if necessary.
If a file is open during Exit, that file will
automatically open at next session.
Edit Menu
Copy DSP Data
Places a copy of the DSP data from the selected object
into the Clipboard. DSP Data represents the current settings
of that Component Object. See Component Object Properties.
DSP Data can be copied from only one Component Object at a time.
NOTE: Software now supports Copy/Paste DSP Data between objects
which are of the same type, but which have different sized configurations.
Examples: 4x4 & 8x8 Matrix Mixers; 3-band & 5-band Parametric EQ.
Paste DSP Data
Places a copy of the DSP data from the Clipboard into the
selected Component Object. DSP Data represents the current
settings of that Component Object. See Component Object Properties.
DSP Data can be pasted simultaneously into multiple Component Objects.
NOTE: Software now supports Copy/Paste DSP Data between blocks
which are of the same type, but which have different sized configurations.
Examples: 4x4 & 8x8 Matrix Mixers; 3-band & 5-band Parametric EQ.
To Next Page
Loading...
