63
Parametric Equalizer
Active Band selects the current band to be adjusted. Center Freq. adjusts the center frequency for the
current band. Gain adjusts the amount of cut or boost applied at the center frequency for the current band.
Bandwidth adjusts the range of frequencies, above & below the center frequency, which are also affected
by the current band. These settings may also be adjusted by dragging the band controls shown inside the
graph. Dragging the white dot affects both Center Freq. & Gain. Dragging either yellow dot affects
Bandwidth. Flatten Band & Flatten All change the band(s) Gain to '0' (flat). Bypass Band & Bypass All
disable the band(s) without changing settings. Drag Points turns on/off the band controls, revealing the
resultant curve only. Band highlights the current band inside the graph.
Right-clicking over certain settings will provide a menu of additional options.
To Next Page
Loading...
