74
Ambient Noise Compensator
Ambient Noise Compensators automatically adjust program volume in response to changes in background
noise levels, as monitored by external ambient sensing microphone(s).
Program Mute turns the program input signal on/off. Program Level adjusts the relative program input
volume. Program Label provides a custom label, when the dialog box is minimized (see below). Prog
Meter displays the current program input level.
Ambient Mute turns the ambient input signal on/off. Ambient Level adjusts the relative ambient input
volume. Ambient Threshold determines the ambient noise level at which program gain increases will
begin. Ambient Response sets the period of time to be considered when calculating an average of
ambient level changes. Ambient Label provides a custom label, when the dialog box is minimized (see
below). Amb Meter displays the current ambient input level. The Set Threshold button can be used to
estimate an appropriate Ambient Threshold setting.
Gain Min sets the minimum output gain (for periods of low ambient noise). Gain Max sets the maximum
output gain (for periods of high ambient noise). Gain Ratio determines how much the program volume will
increase, relative to a given increase in ambient noise. Gain Time establishes how quickly program gain
changes are applied. Gain Time indicates the amount of time required for a gain change between Min and
Max settings. Lesser gain changes will occur more rapidly. Gain Meter displays the current gain
compensation being applied. Bypass disables the Ambient Noise Compensator without changing settings.
Right-clicking over certain settings will provide a menu of additional options. Control Dialog Boxes for
Ambient Noise Compensators can be minimized to create user control surfaces (see Customizing
Component Objects).
see Ambient Noise Compensator setup procedure.
To Next Page
Loading...
