Field Description
Displays the second channel used.
Bandwidth For Operation Mode = 3%% / :# 09
' or :# 09 61
Not for Operation Band = ?H /-
Select how many channels are to be used.
Possible values:
• '?H (default value): One channel with 20 MHz bandwidth
is used.
• '?H: Two channels each with 20 MHz bandwidth are
used. In the case one channel acts as a control channels and
the other as an expansion channel.
Number of Spatial
Streams
Not for Wireless Mode =
Select how many traffic flows are to be used in parallel.
Possible values:
• : Two traffic flows are used.
• : One traffic flow is used.
Transmit Power Select the maximum value for the radiated antenna power. The
actually radiated antenna power may be lower than the maxim-
um value set, depending on the data rate transmitted. The max-
imum value for Transmit Power is country-dependent.
Possible values:
• '> (default value): The maximum antenna power is used.
• :
• :
• :
• :
• :
• , :
Fields in the menu Performance Settings
10 Wireless LAN bintec elmeg GmbH
146 bintec RS Series
To Next Page
Loading...
