Field Description
Wireless Mode Select the wireless technology that the access point is to use.
Only for Operation Mode = 3%% / :# 09
' and Operation Band = ?H /- or for
Operation Mode = 3%% 61 and Operation Band =
?H
Possible values:
• #: The device operates only in accordance with
802.11g. 802.11b clients have no access.
• ": Your device operates only in accordance with
802.11b and forces all clients to adapt to it.
• > "/#!: Your device adapts to the client
technology and operates according to either 802.11b or
802.11g.
• > 1# "/#!: Your device adapts to the cli-
ent technology and operates according to either 802.11b or
802.11g. Only a data rate of 1 and 2 mbps needs to be sup-
ported by all clients (basic rates). This mode is also needed
for Centrino clients if connection problems occur.
• > "/#!: Your device adapts to the
client technology and operates according to either 802.11b or
802.11g. The following applies for mixed-short: The data rates
5.5 and 11 mbps must be supported by all clients (basic
rates).
• "/#/: Your device operates according to either
802.11b, 802.11g or 802.11n.
• #/: Your device operates according to either
802.11g or 802.11n.
• : Your device operates only according to 802.11n.
For Operation Band = ?H , ?H -,
?H /-, ?H -
Possible values:
• : The device operates only in accordance with
802.11a.
• : Your device operates only according to 802.11n.
• /: Your device operates according to either
bintec elmeg GmbH
10 Wireless LAN
bintec RS Series 147
To Next Page
Loading...
