Field Description
radio connection becomes weaker.
• ) @#: The WLAN client searches for available wire-
less networks if it is no longer connected to a wireless net-
work.
• 6 @#: Specify the individual roaming paramet-
ers.
Scan Threshold
Indicates the value in dBm above which the system scans for
available wireless networks in the background.
The value can only be modified for Roaming Profile = 6
@#. The default value is , :.
Scan Interval Indicates the interval in milliseconds after which the system
scans for available wireless networks.
The value can only be modified for Roaming Profile = 6
@#. The default value is .
Min. Period Active
Scan
Displays the minimum active scanning time for a frequency in
milliseconds.
The value can only be modified for Roaming Profile = 6
@#. The default value is .
Max. Period Active
Scan
Displays the maximum active scanning time for a frequency in
milliseconds.
The value can only be modified for Roaming Profile = 6
@#. The default value is .
Min. Period Passive
Scan
Displays the minimum passive scanning time for a frequency in
milliseconds.
The value can only be modified for Roaming Profile = 6
@#. The default value is .
Max. Period Passive
Scan
Displays the maximum passive scanning time for a frequency in
milliseconds.
The value can only be modified for Roaming Profile = 6
@#. The default value is .
Max. Scan Duration Displays the maximum scanning duration for a frequency in mil-
bintec elmeg GmbH
10 Wireless LAN
bintec RS Series 151
To Next Page
Loading...
