Fig. 97: Networking->QoS->QoS Interfaces/Policies->New
The Networking->QoS->QoS Interfaces/Policies->New menu consists of the following
fields:
Fields in the Basic Parameters menu.
Field Description
Interface Select the interface for which QoS is to be configured.
Prioritisation Al-
gorithm
Select the algorithm according to which the queues are to be
processed. This activates and deactivates QoS on the selected
interface.
Possible values:
• ( I#: QoS is activated on the interface. The
available bandwidth is distributed strictly according to the
queue priority.
• 2# @ @": QoS is activated on the interface.
The available bandwidth is distributed according to the
weighting (weight) of the queue. Exception: High-priority pack-
ets are always handled with priority.
• 2# < I#: QoS is activated on the inter-
face. The available bandwidth is distributed as “fairly” as pos-
sible among the (automatically detected) traffic flows in a
queue. Exception: High-priority packets are always handled
with priority.
• 5"1 (default value): QoS is deactivated on the inter-
face. The existing configuration is not deleted, but can be ac-
tivated again if required.
bintec elmeg GmbH
12 Networking
bintec RS Series 241
To Next Page
Loading...
