Field Description
Traffic shaping Activate or deactivate data rate limiting in the send direction.
The function is enabled with "1.
The function is disabled by default.
Maximum Upload
Speed
Only for Traffic shaping = enabled.
Enter a maximum data rate for the queue in the send direction
in kbits.
Possible values are to .
The default value is , i.e. no limits are set, the queue can oc-
cupy the maximum bandwidth.
Protocol Header Size
below Layer 3
Only for Traffic shaping = enabled.
Choose the interface type to include the size of the respective
overheads of a datagram when calculating the bandwidth.
Possible values:
• . $ : Value in byte.
Possible values are to .
• .$ %1 ? -$$J! (default
value)
Can only be selected for Ethernet interfaces
•
• E03)
•
• E03)
Can only be selected for IPSec interfaces:
• %
• % E03)
• %
• % E03)
Encryption Method Only if an IPSec Peers is selected as Interface, Traffic shap-
12 Networking bintec elmeg GmbH
242 bintec RS Series
To Next Page
Loading...
