Rev 3.1 10. EtCO2 165
BM5 (CS,CX) User’s Manual
2. Inserting the sample cell into the receptacle automatically starts the sampling pump.
Removal of the sample cell turns the sample pump off.
3. To remove the sampling kit sample cell from the sample cell receptacle, press down on the
locking tab and pull the sample cell from the sample cell receptacle.
EtCO2 connector position and accessory (Mainstream, Respironics)
EtCO2 Connector
CAPNOSTAT 5 mainstream CO2 sensor and connector
Mainstream sensor Mainstream sensor connector
EtCO2 accessories for mainstream applications
EtCO2 monitoring accessory uses the accessories for CapnoStat 5 microstream sensor of
Respironics Company.
To Next Page
Loading...
