Recommended separation distance
Where
P
is the maximum output power
rating of the transmitter in watts (W)
according to the transmitter manufactur
er and
d
is the recommended separatio
n distance in meters (m).
Field strengths from fixed RF transmitt
ers, as deter-mined by an electromagn
etic site survey,
(a) Should be less than the compliance
level in each frequency range (b).
Interference may occur in the vicinity
of
equipment marked with the following s
ymbol:
Note 1)
U
т is the A.C. mains voltage prior to application of the test level.
Note 2) At 80 MHz and 800 MHz, the higher frequency range applies.
Note 3) These guidelines may not apply in all situations. Electromagnetic propagation is affec
ted by absorption and reflection from structures, objects and people.
To Next Page
Loading...
