6 | Chapter 1: Introduction
Package Contents
n Part numbers and package contents are subject to change and vary according
to instrument model. Please contact BioTek Customer Care if you have any
questions.
n BioStack Microplate Stacker (PN BIOSTACK2WR, BIOSTACK3WR, BIOSTACK4)
n Power supply: 24 volt (PN 01281)
n Plate stacking pedestal (PN 7312083)
n Grease kit (PN 7110017)
n BioStack Operator’s Manual (PN 7311000) on USB flash drive (PN 7310571)
Optional Accessories
l Set of two microplate stacks
Stack Type Any BioStack
¥
BioStack 4*
30-plate 7310008‡ 1230004
10-plate 7310030 1230003
50-plate 7310539 N/A
* These stacks are required for transferring plates with lids. The 50-plate stacks can be used on the
BioStack 4 to process plates only, not plates with lids.
¥ Recommended for low-volume PCR plates.
‡ Also supports up to 44 low-profile, 1536-well plates without lids.
Note: Stack Types are named for the number of plates they can hold without lids.
When using lids, the approximate number of plates with lids the 30-plate stack holds is 25;
for the 10-plate stack, it's 8, depending on the manufacturer. Another limiting factor is
that the total weight of the filled plates in the stack cannot exceed 7.0 lbs (3.2 kg).
BioStack™ Microplate Stacker
To Next Page
Loading...
Need help?
General
