Introducing the BioStack | 3
BioStack Gripper arm Stack, pedestal and plates
All current BioStack models have rotational wrists that
enable them to interface with most BioTek instruments in
the most convenient and comfortable angle/position.
A tool to help load plates into
the stack, called a pedestal, is
provided with the BioStack: See
Load Plates Using the
Pedestal on page 44.
Important: Review the Wrist Angle Setting Requirements on page 26 to determine
if you need to change the wrist angle setting to interface correctly with your BioTek reader
or liquid handler.
Product Description
The BioStack Microplate Stacker is a simple and cost-effective solution for benchtop
automation of BioTek’s microplate instrumentation. The BioStack's compatibility
with a range of detection and liquid handling systems provides laboratories high
throughput processing for a variety of applications in genomics, proteomics, drug
discovery, and clinical diagnostics. Speed, ease of use, and walk-away automation
are guaranteed for any routine microplate process.
The BioStack’s small footprint fits easily in standard laboratory hoods and may not
require a computer. As a batch processor for BioTek readers and liquid handlers,
the BioStack interfaces seamlessly with BioTek’s Gen5 Data Analysis Software and
Liquid Handling Control (LHC) Software.
Up to two BioStacks (2WR models only) can interface with the Precision Microplate
Pipetting System for unattended plate replication, bulk reagent dispensing, or other
liquid handling operations.
BioTek Instruments, Inc.
To Next Page
Need help?
General
