20 | Chapter 2: Installation
Remove the Shipping Hardware—BioStack 3
Warning: Remove the shipping hardware before turning on the BioStack.
Tools: You need a standard screwdriver and a small Phillips-head screwdriver.
One shipping bracket wraps around the front Another shipping block sits inside
1. Remove the two screws from the front of the instrument.
2. Remove the remaining 4 screws inside that hold the bracket onto the instrument.
Carefully remove the bracket.
3. Locate and remove the shipping block and four mounting screws inside the
BioStack.
BioStack™ Microplate Stacker
To Next Page
Loading...
