Unpack and Inspect the Instrument | 15
If you have: You may need:
Precision**‡
with Serial Number >=187931 Basecode software version 2.14 or greater.
Synergy HT
with Serial Number <181151 A BioStack-compatible microplate carrier and new
basecode software (upgrade kit PN 7310007). Note: The
carrier must be installed by authorized Service personnel.
‡ Not compatible with BioStack3/BioStack4.
** The following Precision Microplate Pipetting Systems are not BioStack-
compatible:
o
Instruments with Serial Number < 187931,
o
12-channel model
o
Universal models (PRC384U).
Unpack and Inspect the Instrument
n Save all packaging materials. If you need to ship the instrument or accessories
to BioTek for repair or replacement, you must use the original packaging. Using
other forms of commercially available packaging is not recommended and can
void the warranty. If improper packaging results in damage to the instrument
during shipping, BioTek may impose additional charges.
Inspect the shipping boxes, packaging, instrument, and accessories for signs of
damage.
If the BioStack is damaged, notify the carrier and your BioTek representative. Keep
the shipping cartons and packing material for the carrier’s inspection. BioTek will
arrange for repair or replacement of your instrument immediately, before the
shipping-related claim is settled.
Unpack the boxes containing the instrument and other equipment:
l BioStack
l Microplate Stacks
l Barcode scanner (optional).
Remove the Shipping Panel
Tools: flat screwdriver
BioTek Instruments, Inc.
To Next Page
Need help?
General
