BK Precision MR Series - Dimensions; Front Panel

Introduction 10
• High power output of up to 5000 watts (0-160V/120A) (0-250V/80A) (0-500V/40A) (0-1000V/20A)
• USBVCP(virtual COM)/USBTMC/RS232/RS485/Analog/GPIB and Ethernet interfaces
• Parallel connectivity for up to *50 units
• Adjustable voltage and current slope
• 9 user dened programs with up to 100 steps each
• OVP, OCP, OPP, CV to CC, and CC to CV protection
• Store/recall up to 100 sets of voltage/current settings
*Parallel connectivity and operations can be congured in several dierent modes, however speed and performance will
decrease as each additional units are paralleled together. Refer to section 3.6 Parallel Operation and 4.1 RS485 for more
details regarding the conguration, setup, and limitations. If you wish to connect more than 10 units in parallel, we
advise to contact us at bkprecision.com for further assistance.
1.4 Dimensions
The MRs power supply’s dimensions are approximately:
16.5” x 3.5” x 21” (420 x 88 x 532 mm)
38.6 lbs (17.5 kg)
Figure 1.2 Dimensions
1.5 Front Panel
The front panel interface allows for control of the unit.
Item Description
1 Power Switch
2
Vacuum Fluorescent
Display
3 LAN Status indicator
4 Keypad lock indicator
5 Main function keys
6 Numeric keys
7 Function keys
8 Rotary Knob
9 Navigation Keys