System Menu
All setup procedures and settings explained in this section can be accessed from the SYSTEM menu.
To access this menu, press and press the button ve times until SYSTEM is displayed.
Press the button to enter the menu.
8.1 Enable/Disable Key Sound
By default the key sound is enabled. To disable or re-enable the key sound:
• From the SYSTEM menu, select BEEP and press .
• Select between the two options using the rotary knob:
– On : Enable key sound
– O : Disable key sound
• Select the desired option and press to save the change.
• Press several times to exit the menu setting.
8.2 Error Log
Errors are placed in the order that they were encountered. 1 being the most recent.
The error log displays up to 50 error codes.
After reaching 50 error codes no more codes will be reported in the error log.
To continue ling error codes the error log list must be cleared
To view the error codes:
• From the System menu, select Error Code List.
To clear the error codes:
1. From the System menu, select Error Code Clear.
2. Enter the default password: “13579” and press .
To Next Page
Loading...
Need help?
General
