BK Precision MR Series - Save;Recall Instrument Settings; Save Settings; Recall Settings

System Menu 54
8.4 Save/Recall Instrument Settings
The instrument can save up to 10 voltage/current values for quick recall.
8.4.1 Save Settings
1. Set up output voltage and current settings that you want to save.
2. Then, press followed by . The display will show the following:
3. Use the current adjust knob or the numeric keypad to enter the memory location in which to store current instrument
settings. Select between 1 – 10. Press to save to the selection location.
8.4.2 Recall Settings
1. Press to enter Recall mode. The current group number will shown on the display.
Instrument settings can only be recalled when the instrument enters this mode.
2. Use the keypad to enter the memory location you want to recall. Enter a value between 1 and 10. The voltage and
current settings of that memory location will be shown on the bottom of the display.
3. Once entered, the saved settings at the location will be immediately recalled.
Note:
When in Recall mode, users can recall settings from dierent locations without having to press addi-
tional keys each time. For example, you can press 1 to recall settings in location one, and then press
5 to immediately recall settings in location 5.