BK Precision MR Series - Restore Factory Default Settings

System Menu 52
Error Code Denition Error Code Denition
B001 Buck BUS Error P001 PFC Over current
D001 Control board EEPROM Error P002 PFC board no response
F001 AC Input Freq. Error P003 PFC BUS low
H001 H/W OVP fail P004 PFC BUS High
H002 H/W OCP fail P005 PFC Relay OFF
M001 Module 1 voltage Error R001 Remote sense reverse
M002 Module 2 voltage Error R002 Remote sense open
M003 Module 3 voltage Error R003 Remote sense fail
M004 Module 4 voltage Error T001 Transformer of DC to DC over temperature
M101 Module 1 current Error T002 MOSFET of buck over temperature
M102 Module 2 current Error T003 MOSFET of Dummy Load over temperature
M103 Module 3 current Error T004 PFC over temperature
M104 Module 4 current Error V001 H/W high voltage
N001 FAN Error V101 AC Input voltage too low
V102 AC Input voltage too high
Table 8.1 Error Code List
8.3 Restore Factory Default Settings
To set all settings to factory default:
1. From the SYSTEM menu, press the button 3 times to display DEFAULT.
2. Press to select DEFAULT .
3. The instrument will return to the normal display and all settings will now restored back to factory default.
(see table 8.2)