BK Precision MR Series User Manual

Contents
1 Introduction 9
1.1 Product Overview 9
1.2 Contents 9
1.3 Features 9
1.4 Dimensions 10
1.5 Front Panel 10
1.6 Display 11
1.7 Rear Panel 11
2 Getting Started 12
2.1 Input Power and Fuse Requirements 12
2.2 Fuse Replacement 14
2.3 Rackmount Installation 14
2.4 Output Connections 15
2.5 Preliminary Check 15
2.5.1 Verify AC Input Voltage 15
2.5.2 Connect Power 15
2.5.3 Warm-Up Time 15
2.5.4 Output Check 15
3 Front Panel Operation 18
3.1 Menu Options 18
3.1.1 Conguration 18
3.1.2 Parallel 18
3.1.3 PV Simulation 18
3.1.4 Power-On State 19
3.1.5 COMMUNICATION 19
3.1.6 System 19
3.2 How to Access the Menu 19
3.3 Congure Voltage/Current Output 20
3.3.1 Setting Voltage 20
3.3.2 Setting Current 20
3.3.3 Local Sense 21
3.4 Voltage/Current Measurement 22
3.5 Cong Menu 23
3.5.1 Output Limit Settings 23
3.5.2 Over Voltage Protection (OVP) 23
3.5.3 Over Current Protection (OCP) 24
3.5.4 Over Power Protection (OPP) 25
3.5.5 CV to CC Protection 25
3.5.6 CC to CV Protection 26
3.5.7 External Analog Control 26
3.5.8 External Control Settings 28
3.6 Local/Analog Control 28
3.7 Voltage Program 29
3.7.1 Voltage Mode 29
3.7.1 Resistor Mode 30
3.7.1 Voltage Monitor 31
3.7.2 Current Monitor 31
3.7.3 Shut O Control 31

BK Precision MR Series Specifications

General

Brand	BK Precision
Model	MR Series
Category	Power Supply
Language	English