6
CE Declaration of Conformity
This instrument meets the requirements of 2006/95/EC Low Voltage Directive and 2004/108/EC Electromagnetic Com-
patibility Directive with the following standards.
Low Voltage Directive
– UL 61010-1:2012
EMC Directive
– EN 55011:2009+A2:2010
– EN 61000-3-11: 2000
– EN 61000-3-12: 2011
– EN 61000-4-2 / -3 / -4 / -5 / -6 / -8 / -34
– EN 61326-1: 2013
– EN 61326-2-1: 2013
Declaration of Conformity and test report available under request
Safety Symbols
Symbol Description
indicates a hazardous situation which, if not avoided, will result in death or serious injury.
indicates a hazardous situation which, if not avoided, could result in death or serious injury
indicates a hazardous situation which, if not avoided, will result in minor or moderate injury
Refer to the text near the symbol.
Electric Shock hazard
Alternating current (AC)
Chassis ground
Earth ground
This is the In position of the power switch when instrument is ON.
This is the Out position of the power switch when instrument is OFF.
is used to address practices not related to physical injury.
To Next Page
Loading...
Need help?
General
