25
LEGACY
Center Section Area of Bundle 66000126
30C 2 BP3538 TENSION BUSHING, 2” X 1-3/4” X 1-1/2” OAL
31 1 AM6172 FRAME, MAIN, AT6020
31A 1 BP3516 TENSION BUSHING, 1-1/4” X 1” X 1” OAL
32 4 AM6179 LINKAGE, CYLINDER LUG SUPPORT
33 1 AM6182 LINKAGE, TONGUE CYLINDER ARM
33A 4 BP3072 GREASE ZERK, 1/4”-28
33B 1 BP3516 TENSION BUSHING, 1-1/4” X 1” X 1” OAL
34 1 AM6183 LINKAGE, TONGUE CYLINDER
35 1 AM6187 WING, PRIMARY, LH, AT6010
35A 2 BP3072 GREASE ZERK, 1/4”-28
36 1 AM6188 WING, PRIMARY, RH, AT6010
37 2 AM6202 CYLINDER LUG, BOLT-ON W/ NOTCH
37A 2 BP3516 TENSION BUSHING, 1-1/4” X 1” X 1” OAL
38 1 AM6263 BRACKET, PIVOT, DEPTH CONTROL
39 1 AM6264 ARM, VALVE, DEPTH CONTROL
40 1 AM6266 LINKAGE, STOP, DEPTH CONTROL
41 1 AM6271 LATCH, DEPTH CONTROL ADJUSTER
42 1 AM6276 ADJUSTER BRACKET, LEGACY DEPTH CONTROL
43 4 AP2215 DECAL, BLU-JET, 3” X 8”
44 1 AP2222 DECAL, STAND CLEAR OF TONGUE, TONGUE LIGHT
45 1 AP2231 DECAL, FEMA, 2-1/2” X 1-1/2”
46 4 AP2234 DECAL, DANGER STAND CLEAR FALLING WING
47 1 AP2469 DECAL, SAFETY CHAIN
48 1 AP2483 DECAL, DANGER, FALLING FROM EQUIPMENT
49 2 AP2554 DECAL, LEGACY
50 12 AP2711 SNAP RING, 1-1/4 EXTERNAL, HEAVY DUTY
51 1 AP2864 PERFECT HITCH, CAT IV, BLACK
52 2 AP2871 HOSE RETAINER
53 1 AP2914 DECAL, WARNING, HIGH-PRESSURE FLUID
54 1 AP4391 TRANSPORT CHAIN, 60,000#, 5/8’’
55 1 BM3453 SPACER
56 2 BM3465 PIN, 1-1/4” X 7-3/4” OAL, W/ 13/32” HOLE, PLTD
57 4 BM3485 PIN, 1-3/4” X 12-1/8” OAL, W/ 21/32” HOLE, PLTD
58 1 BM3487 PIN, 1 X 7-3/4” OAL, W/ 13/32” HOLE, PLTD
59 2 BM3497 PIN, 1-3/4” X 14-3/4” OAL
60 2 BM3544 PIN, 1-1/4” X 9” USEABLE
61 2 BM3547 PIN, 1-1/4” X 5-3/4” USEABLE
62 2 BM3555 HEX BOLT, 1”-8 X 7-5/16”, FULL THREAD WELDED HEAD
63 2 BM3565 PIN, 2” X 10-1/4” OAL, W/ 21/32” HOLE, PLTD
64 2 BM3610 PIN, 1-3/4” X 6-1/8” USEABLE W/ANTI-ROTATION HEAD
65 2 BM3664 PIN, 1-3/4” X 16-9/16” OAL, W/ 21/32” HOLE
66 12 BP3001 NUT, HEX, 3/8”-16, GRADE 2, PLATED
67 12 BP3002 WASHER, LOCK, 3/8”, PLATED
68 9 BP3003 NUT, HEX LOCK, 3/8”-16, GRADE 2, PLATED
69 6 BP3005 HEX CAP SCREW, 3/8”-16 X 1-1/2”, GRADE 5, PLATED
70 2 BP3006 HEX CAP SCREW, 3/8”-16 X 1”, GRADE 5, PLATED
To Next Page
Loading...
