Bobcat MT55 - Page 92

90 MT55 Operation & Maintenance Manual
LUBRICATING THE MINI TRACK LOADER (CONT’D)
Lubrication Locations (Cont’d)
Figure 122
8. Common Industry Interface Pivot Pin (Both Sides)
[Figure 122] (If equipped).
9. Common Industry Interface Locking Pin (Both Sides)
[Figure 122] (If equipped).
Figure 123
10. Early Models Only: Ride-On Operator Platform
Wheel and pivot [Figure 123] (If Equipped). (Later
models use sealed bearings, no service required.)
Figure 124
Lubricate the parking brake pin (Item 1) [Figure 124]
with anti-seize compound only.
Move the parking brake lever back and forth to spread
the lubricant over the entire pin area.
Repeat the lubrication for the parking brake pin on the
other side.
P124025
9
8
9
8
P-48556
8
P-48555
1
92 of 122
Dealer Copy -- Not for Resale