787 Flight Crew Operations Manual
DO NOT USE FOR FLIGHT
Preface -
Introduction
Copyright © The Boeing Company. See title page for details.
D615Z003-TBC 0.2.5
• Specific options [Option – xxx, xxxx] where the configuration variable(s)
are stated within the annotation (multiple variables, if applicable, are
separated by commas); e.g.
[Option – HF, SATCOM]
The tuning and control panels (TCP) are used to tune and control the VHF, HF,
SATCOM, cabin interphone, and other airplane systems. The panels are
designated left, center, and right, and are normally associated with the respective
VHF and HF radios.
Customer Configured Airplane Effectivity
Differences in airplane configuration for customer specific documents are shown
by use of airplane effectivity throughout Volumes 1, 2, and QRH. The following
rules are used to express airplane effectivity within customer documents:
• airplane effectivity can be displayed in one of four different formats; by
tabulation number, serial number, registry number or (customer defined)
airplane number. The default FCOM/QRH document effectivity display is
by tabulation number
• airplane effectivities are listed in alpha-numeric order. A range of airplanes
is defined by a dash, e.g. ZX008 - ZX014. A comma in the effectivity
range indicates a break in the range, e.g. ZX008 - ZX014, ZX019, ZX021 -
ZX025
• airplane effectivities apply only to the paragraph, illustration, operational
note, procedural step, etc. and to subordinate items (if any) just below the
specific effectivity range annotation;
Example (with subordinate items):
In this example, the effectivity ZX008 - ZX014 applies to the first procedural step
(Tail skid .....) and further indented/subordinate step (Verify ....). The effectivity
does not apply to the next equivalently indented step (Horizontal stabilizer .....).
Example (without subordinate items):
ZX008 - ZX014
Tail skid ...................................................................................Check
Verify that the tail skid is not damaged.
Horizontal stabilizer and elevator ...............................................Check
ZX008 - ZX014
CARGO TEMPERATURE selector........................................ As needed
FORWARD CARGO AIR CONDITIONING......................... As needed
August 14, 2009
To Next Page
Loading...
