787 Flight Crew Operations Manual
DO NOT USE FOR FLIGHT
Normal Procedures -
Amplified Procedures
Copyright © The Boeing Company. See title page for details.
NP.21.26 D615Z003-TBC
Before Start Procedure
Start the Before Start Procedure after papers are on board.
Flight deck door ....................................... Closed and locked F/O
Do the CDU/EFB Preflight Procedure – Performance Data steps before
completing this procedure.
CDU display ......................................................................Set C, F/O
Normally the PF selects the TAKEOFF REF page.
Normally the PM selects the LEGS page.
MCP ..................................................................................Set C
IAS/MACH selector – Set V2
Arm LNAV as needed.
Arm VNAV.
Initial heading or track – Set
Initial altitude – Set
Taxi and Takeoff briefings ..................................... Complete C, F/O
The pilot who will do the takeoff does the taxi and takeoff briefings.
Exterior doors ....................................................Verify closed F/O
Start clearance .............................................................Obtain C, F/O
Obtain a clearance to pressurize the hydraulic systems.
Obtain a clearance to start the engines.
If pushback is needed:
Nose gear steering ................................. Verify locked out C
HYDRAULIC panel..........................................................Set F/O
WARNING: If the tow bar is connected, do not pressurize the
hydraulic systems until the nose gear steering is
locked out. Unwanted tow bar movement can occur.
February 15, 2010
To Next Page
Loading...
