787 Flight Crew Operations Manual
DO NOT USE FOR FLIGHT
Normal Procedures -
Amplified Procedures
Copyright © The Boeing Company. See title page for details.
D615Z003-TBC NP.21.31
Before Takeoff Procedure
[Option – GE engines]
Engine warm up requirements:
• engine oil temperature must be above the bottom of the
temperature scale
[Option – GE engines]
Engine warm up recommendations:
• run the engines for at least 2 minutes
• use a thrust setting normally used for taxi operations
[Option – RR engines]
Engine warm up requirements:
• when the engines have been shut down more than 1.5 hours: run
the engines for at least 5 minutes
• when the engines have been shut down less than 1.5 hours: run the
engines for at least 2 minutes
• use a thrust setting normally used for taxi operations
• engine oil temperature must be above the lower amber band before
takeoff
Pilot Flying Pilot Monitoring
Notify the cabin crew to prepare for takeoff.
Verify that the cabin is secure.
The pilot who will do the takeoff updates changes to the takeoff briefing as needed.
Set the weather radar display as needed.
Select VSD on as needed.
[Option – GPWS Lookahead peaks]
Set the terrain display as needed.
Call “BEFORE TAKEOFF CHECKLIST.” Do the BEFORE TAKEOFF checklist.
February 15, 2010
To Next Page
Loading...
