Boeing 787-8 - Page 1343

787 Flight Crew Operations Manual
DO NOT USE FOR FLIGHT
Flight Management, Navigation -
FMC Cruise
Copyright © The Boeing Company. See title page for details.
D615Z003-TBC 11.42.31
The constant speed cruise starts at BTG at .800 Mach. Entry is in Mach.
The constant speed cruise ends at OAK then ECON speed is used. If an RTA
waypoint exists at RBL or OAK, the RTA is deleted.
Entry can be a Mach number, ECON/ or E/, LRC/ or L/. If an RTA waypoint is in
the flight plan, RTA/ or R/ may be entered.
If no end waypoint is specified, the constant speed terminates at top of descent.
The FMC may select the end waypoint if an RTA waypoint is entered. The FMC
selects the end waypoint to allow enough distance to arrive at the RTA waypoint
on time. In the example, if the FMC selected OAK as the end waypoint, RTA
would replace ECON.
(Refer to RTA Progress Page 3
in Chapter 11, Section 42, for additional
information.)
1
Start Waypoint for Constant Speed Cruise
2
End Waypoint for Constant Speed Cruise
--------------------------------------
NOCE /
80
08
0
0
/538FL0.
/538FL0.
/5308 FL 0.
83
33
2
56
92
EVA
KAO
LBR
BBRED
9
12
26
65
5
B
TADETRA>
/5308FL0.
NM
1NM
41NM
41
ESARE
GT
2
o
1
o
1
o
1
61
o
/
NM
o
17NM
O 1GMDRTE LE S
<
0FL35
M
.
8
0
0
Start
BTG
ECON
RBL
End
OAK
AVE
M.800
DERBB
E
C
O
N
1
2
February 13, 2009