787 Flight Crew Operations Manual
DO NOT USE FOR FLIGHT
Supplementary Procedures -
Flight Management, Navigation
Copyright © The Boeing Company. See title page for details.
SP.11.4 D615Z003-TBC
LDG ALT selector ..............................................................................Pull
Rotate to set the departure airport altitude manually. This reduces
crew workload in the event of a return to the departure airport.
Do not accomplish the following checklist:
LANDING ALTITUDE
After engine start, override the LANDING ALTITUDE checklist.
Note: The LDG ALT flag is shown on the PFD.
Note: The landing altitude reference bar (white/amber bar) is not
shown on the PFD altitude tape.
Note: The landing altitude indication (amber crosshatched area) is not
shown on the PFD altitude tape.
When no longer needed, delete the departure navaid frequency and
CRS.
Before Descent
LDG ALT selector ............................................................................ Push
The FMC sets the destination altitude automatically.
February 15, 2010
To Next Page
Loading...
