787 Flight Crew Operations Manual
DO NOT USE FOR FLIGHT
Supplementary Procedures -
Flight Management, Navigation
Copyright © The Boeing Company. See title page for details.
D615Z003-TBC SP.11.5
Destination Airport Not in the FMC Navigation Database
CDU/EFB Preflight Procedure - Captain and First Officer
The following steps can also be done in flight.
LEGS key .......................................................................................Select
Enter the latitude and longitude of the destination airport as the final
waypoint on the route.
Enter a speed/altitude constraint for the final waypoint. The speed
constraint should be the planned approach speed and the altitude
constraint should be the destination airport elevation.
ACTIVATE (if needed) and execute the route.
Before Descent
VNAV key ......................................................................................Select
NEXT PAGE key ............................................................................Select
FORECAST ....................................................................................Select
Shows the DESCENT FORECAST page.
TRANS LVL .................................................................................... Enter
LDG ALT selector ............................................................................. Pull
Rotate to set the destination airport altitude manually.
Do not accomplish the following checklist:
LANDING ALTITUDE
Override the LANDING ALTITUDE checklist.
Note: The LDG ALT flag is shown on the PFD.
Note: The landing altitude reference bar (white/amber bar) is not
shown on the PFD altitude tape during approach.
Note: The landing altitude indication (amber crosshatched area) is not
shown on the PFD altitude tape during landing.
Note: The ARRIVALS page is not available for the destination
airport.
August 14, 2009
To Next Page
Loading...
