787 Flight Crew Operations Manual
DO NOT USE FOR FLIGHT
Communications -
MFD Communications Functions
Copyright © The Boeing Company. See title page for details.
5.40.12 D615Z003-TBC
Help Window
Title
Condition Help Window Text
ABORTED ATC connection not
established, lost or loss of
handoff to a new active
center, while a message is
transmitting or before
acceptance.
UPLINK ABORTED BEFORE
FLIGHT CREW RESPONSE
CONTACT ATC BY VOICE IF
RESPONSE REQUIRED
COMM MASTER
SWITCH
Comm master switch -
messages lost.
COMPANY MESSAGE LOG
LOST
INVALID ENTRY An entry box is selected
and the scratchpad value is
not valid.
(Specific to type of entry error)
MESSAGE LIMIT
EXCEEDED
Message exceeded the
maximum allowable
length.
DOWNLINK MESSAGE
STORAGE IS FULL
CONFIRM DATALINK STATUS
BEFORE SENDING MESSAGES
MESSAGE LIMIT
EXCEEDED
Selection of a message
element when the number
already selected equals the
maximum.
CANNOT SELECT
ADDITIONAL MESSAGE
ELEMENTS
NO ACCEPT
(company)
ACCEPT response is not
successfully transmitted or
an ACCEPT response is not
required.
UNSUCCESSFUL WILCO,
ROGER OR AFFIRM RESPONSE
RESPOND TO ATC BY VOICE
NO PRINT An attempt to send a
message(s) to the printer is
unsuccessful.
UNSUCCESSFUL PRINT
CHECK PRINTER
NO REJECT
(company)
REJECT response is not
successfully transmitted or
a REJECT response is not
required by the message.
UNSUCCESSFUL UNABLE OR
NEGATIVE RESPONSE
RESPOND TO ATC BY VOICE
NO SEND An attempt to send a
downlink message is
unsuccessful.
UNSUCCESSFUL MESSAGE
TRANSMISSION
RETRY OR CONTACT ATC ON
VOICE
NOT ALLOWED An attempt was made to
enter data into a menu entry
field.
NO DATA ENTRY IN THIS BOX
ITEM MUST BE SELECTED
FROM LIST
June 16, 2008
To Next Page
Loading...
