7.17.2 ADVANCED Control Panel HAP01.1A
For a detailed description of the control panel, see the documen‐
tation "Application Manual, Functions
" of the firmware used.
Fig. 7-8: ADVANCED Control Panel HAP01.1A
Description
The ADVANCED control panel HAP01.1A
● has a slot for a microSD memory card (PFM04.1)
● has a single-line display
● is suited for hot plug
● can be used as programming module
● The display shows operating states, command and error diagnoses and
pending warnings.
● Using the four keys, the commissioning engineer or service technician
can have extended diagnoses displayed and trigger simple commands.
● Memory:
– 2 MB (data, flash memory)
– 16 MB (code, flash memory)
– 32 kB (retain data, FRAM memory)
DOK-INDRV*-CXX02******-PR03-EN-P Bosch Rexroth AG 77/143
IndraDrive Control Sections CSB02, CSE02, CSH02, CDB02
Optional connection points
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com
To Next Page
Loading...
