Bosch Rexroth IndraDrive CSH02 - Page 97

I [mA] Encoder current consumption
l [m] Cable length
0.5 mm
2
; 1.0 mm
2
Line cross sections
Fig. 8-15: Maximum allowed encoder cable lengths for 12 V encoder systems
depending on the line cross-section at 10 V supply voltage
Nominal current consumption of the MSK motor encoders: 60 mA
Allowed encoder cable length for
resolver encoder systems
75
m at most (The cross section of the supply voltage lines must be at least
0.5 mm
2
.)
DOK-INDRV*-CXX02******-PR03-EN-P Bosch Rexroth AG 95/143
IndraDrive Control Sections CSB02, CSE02, CSH02, CDB02
Technical data - functions
Courtesy of CMA/Flodyne/Hydradyne ▪ Motion Control ▪ Hydraulic ▪ Pneumatic ▪ Electrical ▪ Mechanical ▪ (800) 426-5480 ▪ www.cmafh.com