Bosch rexroth SE 2/C Series - Page 104

104/108 Maintenance and repair
Bosch Rexroth AG, MIT: SE 2/C-…, SE 2/R-…, 3 842 358 737/2022-08
Fig. 88:
563 833-77
3
.../R .../R-H .../R-V
.../R-V
4a 4b 4c
4 4
.../R
.../R-H
.../R-V
A
A
A
A
A
A
B
B
B
BA
.../R
.../R-H
Changing the glide profi le from above: SE 2/R-…, new section profi le (2/2)
3. Remove the worn
glide profi les.
4. Install the new
glide profi les.
 Insert the assembly
aids (A/B) onto the
glide profi le.
• …/R: A, yellow
• …/R-H: A, yellow
• …/R-V: B, red
 Attach the glide
profi le vertically at
the groove.
 Swivel the glide profi le
into the groove.
 Remove the assembly
aids and press the
glide profi le into the
end position.
5. Install the chain,
see chapter "Changing
the conveyor chain".