Bosch rexroth SE 2/C Series - Changing the Glide Profi Le from Above: SE 2;R

Maintenance and repair 103/108
3 842 358 737/2022-08, MIT: SE 2/C-…, SE 2/R-…, Bosch Rexroth AG
10.4.29 Changing the glide profi le from above: SE 2/R-…, new section profi le
Fig. 87:
563 833-76
.../R .../R-H .../R-V
5x
5x
!
2
A
1
)
2
)
B
.../R
C
X
.../R
Y
E
D
Changing the glide profi le from above: SE 2/R-…, new section profi le (1/2)
Required accessories:
• Assembly aid GP 2
(A, yellow) for inserting
the glide profi le into the
section profi le ST 2/R,
…/R-H
(set, 5 pieces)
3 842 564 982
• Assembly aid GP 2 (B, red)
for inserting the glide
profi le into the section
profi le ST 2/R-V
(set, 5 pieces)
3 842 564 984
• Glide profi le (C)
– GP 2/H-ST
3
)
(48 x L=3000 mm)
3 842 564 315
– GP 2/H-KS
4
)
(24 x L=6000 mm)
3 842 564 314
• Guide profi le (D)
– FP 2/C/R
4
)
(12 x L=6000 mm)
3 842 567 261
• Glide profi le (E)
– GP 2
4
) (24 x L=6000 mm)
3 842 567 260
1
) yellow
2
) red
3
) ST = steel
4
) KS = plastic
1. Remove the chain,
see chapter "Changing
the conveyor chain".
2. Clean the interior (X)
of the section profi le
thoroughly.
Please note:
Before removing the glide
profi les, thoroughly clean the
interior (X) of the section
profi le of grease, dirt and
other impurities.
Dirt in the slots (Y) prevents
the assembly of the glide
profi les in the correct
position.
ENGLISH