2.7 Personal protective equipment
• Appropriate protective clothing should be worn when handling/using the product
(e.g. safety shoes, close-fi tting clothing, a hair net for long, loose hair).
As the system owner or operator, you are personally responsible for ensuring the
use of appropriate protective equipment when the product is being used.
All component parts of the personal protective equipment must be free of
damage.
2.8 Owner responsibilities
• Before the initial commissioning or re-commissioning of a conveyor system,
carry out a risk assessment in accordance with DIN EN ISO 12100.
• Before initial commissioning, make sure there are no protruding or sharp-edged
parts that may be a hazard to personnel working or moving in the area.
• Provide safety-related instructions to the operating personnel before initial
commissioning or re-commissioning, and then at regular intervals.
3 General notes on property and product
damage
The warranty only applies to the delivered confi guration.
• The warranty is void in the event of incorrect assembly, commissioning and
operation, as well as improper use and/or improper handling.
• The following safety information applies to sections 6 to 14.
• Ensure that the conveyor chain is lubricated suffi ciently, see page 65.
– Keep a maintenance schedule.
– Keep degreasers or aggressive cleaning agents away from the conveyor chain.
• Deformations such as bending and/or twisting of the chain, e.g., by tilting the
chain reel during installation, can result in conveyor chain failure and even
crashing.
– Make sure the chain remains straight and can leave the chain reel smoothly
during installation.
– Make sure the chain reel cannot fall over during installation.
– If the chain reel has fallen over during installation and the chain is deformed:
Use the disassembly tool to remove the affected area, with a generous margin
on either end.
• Prevent cleaning agents from getting into the system.
• Never use solvents or corrosive cleaning agents.
• Do not use a pressure washer for cleaning.
During operation
During servicing and
repair
During cleaning
General notes on property and product damage 13/108
3 842 358 737/2022-08, MIT: SE 2/C-…, SE 2/R-…, Bosch Rexroth AG
ENGLISH
To Next Page
Loading...
