Bosch rexroth SE 2/C Series - Assembling the Curve KU 2;O-90, KU 2;O-180 on Leg Sets

7.6.3 Assembling the curve KU 2/O-90, KU 2/O-180 on leg sets
Fig. 15:
SW24
M = 25 Nm
D
SW17
M = 25 Nm
D
SW13
M = 25 Nm
D
SW13
M = 25 Nm
D
358 736-24
ST2/C
Assembling the curve KU 2/O-90, KU 2/O-180 on leg sets
1. Install the curve
KU 2/O-… on the leg
sets and align it fl ush
and horizontally.
Please note:
• The curve KU 2/O-... is
a curved section and
assembly of the drive
module, return unit and
chain is therefore the
same as for a section.
30/108 Assembly
Bosch Rexroth AG, MIT: SE 2/C-…, SE 2/R-…, 3 842 358 737/2022-08