Bosch rexroth SE 2/C Series - Assembly Instructions: Running Direction of Chain; Assembly Instructions: Lubricating Points

Maintenance and repair 81/108
3 842 358 737/2022-08, MIT: SE 2/C-…, SE 2/R-…, Bosch Rexroth AG
10.4.14 Assembly instructions: Running direction of chain
NOTICE
Failure of the conveyor chain (fl at top chain / accumulation roller chain with
small parts protection)
 Operating the chain against its running direction can result in conveyor chain
failure or even crashing. There is a risk of damage to property.
 Make sure the chain is installed in the proper running direction.
Flat top chain Accumulation roller chain with small parts
protection
Fig. 64: Running direction of chain
10.4.15 Assembly instructions: Lubricating points
NOTICE
Failure of the conveyor chain (fl at top chain / accumulation roller chain)
 Inadequate lubrication of the conveyor chain can result in conveyor chain
failure or even crashing. There is a risk of damage to property.
 The conveyor chain used in this product comes lubricated.
 Lubricate the conveyor chain before the commissioning with Structovis GHD
0 842 904 229, using 1–2 g oil/m of chain, then every 1,000 hrs with
2–3 g oil/m of chain.
*)*)
Flat top chain Accumulation roller chain Accumulation roller chain Vplus
Fig. 65: Lubricating points
*) Also lubricate the sides of the fl at top chain (curve + section)
Due to the system, the lubricant may be discharged.
ENGLISH