80/108 Maintenance and repair
Bosch Rexroth AG, MIT: SE 2/C-…, SE 2/R-…, 3 842 358 737/2022-08
NOTICE
Failure of the conveyor chain (fl at top chain / accumulation roller chain)
Deformations such as bending and/or twisting of the chain,
e.g., by tilting the chain reel during installation, can result in conveyor chain
failure and even crashing. There is a risk of damage to property.
Make sure the chain remains straight and can leave the chain reel smoothly
during installation.
Make sure the chain reel cannot tilt during installation.
If the chain reel does tilt during installation and the chain is deformed:
Use the disassembly tool to remove the affected area, with a generous margin
on either end.
563 833-39
Fig. 63: Unwinding of the chain from the chain reel
To Next Page
Loading...
