Bosch rexroth SE 2/C Series - Replacing the Gear Motor: as 2;C-400

Maintenance and repair 93/108
3 842 358 737/2022-08, MIT: SE 2/C-…, SE 2/R-…, Bosch Rexroth AG
10.4.22 Replacing the gear motor: AS 2/C-400, …-700, AS 2/R-1200, …-2200,
AS 2/R-V-1200, …-2200, motor mounting (MA) = R/L
Fig. 75:
358 736-68
SW10
M
D
= 8 Nm
3
4
2
5
1
6
SW10
M
D
= 8 Nm
1
6
SW5
M
D
= 8 Nm
3
4
2
5
AS 2/C-400
AS 2/R-1200
AS 2/R-V-1200
AS 2/C-700
AS 2/R-2200
AS 2/R-V-2200
Replacing the gear motor, motor mounting (MA) = R/L
Please note:
The gear motor can only
be exchanged completely.
A separation of motor and
gear is not permitted!
1. Remove the gear motor.
2. Remove the fl ange from
the gear motor.
3. Remove the plug.
4. Mount the plug at the
new gear motor.
5. Mount the fl ange at the
new gear motor.
6. Install the gear motor.
ENGLISH