Bosch rexroth SE 2/C Series - LU 2 Automatic Lubrication Unit

10.3.6 LU 2 automatic lubrication unit
The LU 2 automatic lubrication unit allows for lubrication of the chain while in
operation. Lubrication of the chain is only possible at the drive module.
The automatic lubrication unit LU 2 consists of the components
• LU 2 lubrication unit, 3 842 543 482
• LC 2 oil container, 3 842 543 469
• Adapter set AS 2/C-100, -250, 3 842 543 483
1
)
• Adapter set AS 2/C-400, 3 842 543 484
• Adapter set AS 2/R-300, -700, 3 842 543 485
1
)
• Adapter set AS 2/R-1200, -2200, 3 842 543 486
• Adapter set AS 2/R-V-1200, 3 842 543 487
1
) For retrofi tting older transfer systems without a lubrication hole,
you also need a retrofi t kit LU 2 , 3 842 546 725.
LU 2 AS 2/C-100, AS 2/C-250 AS 2/C-400, AS 2/C-700
LU 2
LC 2
Set AS ...
*)
*)
3 842 543 482, LU 2
+ 3 842 543 469, LC 2 + 3 842 543 483, set AS 2/C-100, -250 + 3 842 543 484, set AS 2/C-400, -700
AS 2/R-300, AS 2/R-700 AS 2/R-1200, AS 2/R-2200 AS 2/R-V-1200, AS 2/R-V-2200
*)
*) *)
+ 3 842 543 485, set AS 2/R-300, -700 + 3 842 543 486, set AS 2/R-1200, -2200 + 3 842 543 487, set AS 2/R-V
Fig. 49:
LU 2 automatic lubrication unit, overview
The holes marked *) are used to connect the LU 2 automatic lubrication unit.
Maintenance and repair 67/108
3 842 358 737/2022-08, MIT: SE 2/C-…, SE 2/R-…, Bosch Rexroth AG
ENGLISH