Bosch rexroth SE 2/C Series - Table of Contents

Contents
1 About this documentation 6
1.1 Validity of the documentation 6
1.2 Required and supplementary documentation 7
1.3 Presentation of information 7
1.3.1 Safety instructions 7
1.3.2 Symbols 8
1.3.3 Designations 9
1.3.4 Abbreviations 10
2 Safety instructions 10
2.1 About this chapter 10
2.2 Intended use 10
2.3 Improper use 10
2.4 Personnel qualifi cations 11
2.5 General safety instructions 11
2.6 Product-specifi c safety instructions 12
2.7 Personal protective equipment 13
2.8 Owner responsibilities 13
3 General notes on property and product damage 13
4 Scope of delivery 14
4.1 Condition on delivery 14
5 About this product 14
5.1 Specifi cations 14
5.2 Specifi cations 14
5.2.1 Use of drive module AS 2/… 14
5.2.2 Version of drive module AS 2/… 14
5.3 Product description 15
5.3.1 Differences between previous and new section profi le 19
5.4 Identifi cation of the product 22
6 Transport and storage 22
6.1 Transporting the product 22
6.2 Storing the product 22
7 Assembly 23
7.1 Unpacking 23
7.2 Installation requirements 23
7.2.1 Installation position 23
7.3 Required tools 23
7.4 Required accessories 24
7.5 Symbols used 25
7.6 Assembling the product 26
7.6.1 Assembling the section ST 2/C, ST 2/R on leg sets 26
7.6.2 Assembling the section ST 2/C-H, ST 2/R-H, ST 2/R-V on leg sets 27
7.6.3 Assembling the curve KU 2/O-90, KU 2/O-180 on leg sets 30
7.6.4 Assembling the drive module AS 2/C-100, …-250, AS 2/R-300, …-700 31
7.6.5 Assembling the drive module AS 2/C-400, …-700, …/R-1200, …-2200,
…/R-V-1200, …-2200 33
7.6.6 Assembling the return unit UM 2/…-170, UM 2/…-60 34
7.6.7 Assembling the cross connector and foundation bracket 35
7.6.8 Assembling the conveyor units drive head-to-return unit 36
7.6.9 Assembly instructions: Unwinding of the chain from the chain reel 38
7.6.10 Assembly instructions: Running direction of chain 39
7.6.11 Assembly instructions: Lubricating points 39
7.6.12 Assembly instructions: Fixing the chain tensioner at
AS 2/C-100, …-250, AS 2/R-300, …-700 40
7.6.13 Assembly instructions: Fixing the chain tensioner at
AS 2/C-H, AS 2/R-H, AS 2/R-V 40
7.6.14 Assembling the conveyor chain: AS 2/C-100, …-250, AS 2/R-300, …-700,
motor mounting (MA) = R/L 41
Contents
3/108
3 842 358 737/2022-08, MIT: SE 2/C-…, SE 2/R-…, Bosch Rexroth AG
ENGLISH