Bosch rexroth SE 2/C Series - Assembling the product

7.6 Assembling the product
7.6.1 Assembling the section ST 2/C, ST 2/R on leg sets
Fig. 11:
max. 2000 mm
358 736-21
M
D
= 25 Nm
SW13
M
D
= 25 Nm
SW13
M
D
= 25 Nm
SW13
M
D
= 25 Nm
SW13
ST2/RST2/C
Assembling the section ST 2/C, ST 2/R on leg sets
Section ST 2/C-H, ST 2/R-
H, ST 2/R-V, see page 29
1. Install the fi rst section
ST 2/... on two leg sets
and align it.
2. Install the subsequent
sections and leg sets
fl ush and horizontally.
Please note:
• Support each section
joint and the ends of the
section with leg sets.
• Max. distance between
2 leg sets: 2000 mm.
26/108 Assembly
Bosch Rexroth AG, MIT: SE 2/C-…, SE 2/R-…, 3 842 358 737/2022-08