Bosch rexroth SE 2/C Series - Designations

1.3.3 Designations
This document uses the following designations:
Table 4: Designations
Designation Meaning
SE 2/C
SE 2/C-H
SE 2/R
SE 2/R-H
SE 2/R-V
SE 2/…: Conveyor unit from the Rexroth TS 2plus transfer system
consisting of drive module, section and return unit.
…/C: Conveyor medium fl at top chain
…/R: Conveyor medium accumulation roller chain
…-H: Heavy-duty version
…-V: Conveyor medium accumulation roller chain Vplus
AS 2/C-100
AS 2/C-250
AS 2/C-400
AS 2/C-700
AS 2/C-H
AS 2/R-300
AS 2/R-700
AS 2/R-1200
AS 2/R-2200
AS 2/R-H
AS 2/R-V-1200
AS 2/R-V-2200
AS 2/…: Drive module from the Rexroth TS 2plus transfer system
…/C: Conveyor medium fl at top chain
…/R: Conveyor medium accumulation roller chain
…-100, …-250, …-300, …-400, …-700, …-1200, …-2200:
Permissible load, sum of loads [kg]
…-H: Heavy-duty version
…-V: Conveyor medium accumulation roller chain Vplus
UM 2/C-60
UM 2/C-170
UM 2/R-60
UM 2/R-170
UM 2/R-V-170
UM 2/…: Return unit from the Rexroth TS 2plus transfer system
…/C: Conveyor medium fl at top chain
…/R: Conveyor medium accumulation roller chain
…-60: Length of return unit [mm]
…-170: Length of return unit [mm]
…-V: Conveyor medium accumulation roller chain Vplus
ST 2/C-100
ST 2/C-H
ST 2/R-100
ST 2/R-H
ST 2/R-V
ST 2/…: Section from the Rexroth TS 2plus transfer system
…/C: Conveyor medium fl at top chain
…/R: Conveyor medium accumulation roller chain
…-100: Height of section profi le [mm]
…-H: Heavy-duty version
…-V: Conveyor medium accumulation roller chain Vplus
KU 2/O-90
KU 2/O-180
KU 2/…: Curve from the Rexroth TS 2plus transfer system
…/O: without built-in drive
…-90, …-180: Curve angle [°]
QV, QV2 Cross connector (between 2 section profi les)
WT 2 Workpiece pallet from the Rexroth TS 2plus transfer system
About this documentation 9/108
3 842 358 737/2022-08, MIT: SE 2/C-…, SE 2/R-…, Bosch Rexroth AG
ENGLISH