Bosch rexroth SE 2/C Series - Assembly Instructions: Changing Chain and Wear Parts

Maintenance and repair 79/108
3 842 358 737/2022-08, MIT: SE 2/C-…, SE 2/R-…, Bosch Rexroth AG
10.4.13 Assembly instructions: Changing chain and wear parts
NOTE!
 Before the assembly of the new chain, clean the chain guides from excess
fat, dirt or other impurities. Check the chain wheels
1
), the glide profi les,
the guide pieces
2
) in the drive and return unit, the chain tensioners
3
),
the connection belt roller
4
) and the associated toothed belt for wear.
Replace the worn parts.
Fig. 62:
563 833-63
2
)
2
)
3
)
1
)
2
)
3
)
3
)
4
)
M
D
= 2,5 Nm
SW4
M
D
= 2,5 Nm
SW4
M
D
= 2,5 Nm
SW4
Wear parts
We recommend:
 When replacing the fl at top chain, always replace the glide profi les as well.
ENGLISH