Bosch rexroth SE 2/C Series - Assembling the Section ST 2;C-H, ST 2;R-H, ST 2;R-V on Leg Sets

7.6.2 Assembling the section ST 2/C-H, ST 2/R-H, ST 2/R-V on leg sets
Fig. 12:
358 736-22
0,3
0,3
0,3
0,3
15°
L
+4°
3
+1
107 107 107
ST2/C-H ST2/R-H ST2/R-V
ST2/C-H ST2/R-H ST2/R-V
L
Assembling the section ST 2/C-H, ST 2/R-H, ST 2/R-V on leg sets (1/2)
Please note:
The requirement for
smooth running of the
conveyor medium and the
workpiece pallet is:
• Glide profi les and guide
profi le are cut and
deburred at right angles.
• All transitions of the
guide profi le are provided
with a chamfer.
• At the start and the end
of the section, the guide
profi le protrudes by 5 mm
in each case in order to
bridge the adapter plates
for mounting of the drive
unit or return unit.
Assembly 27/108
3 842 358 737/2022-08, MIT: SE 2/C-…, SE 2/R-…, Bosch Rexroth AG
ENGLISH