Bosch rexroth SE 2/C Series - Assembling the Drive Module

7.6.4 Assembling the drive module AS 2/C-100, …-250, AS 2/R-300, …-700
Fig. 16:
563 833-80
1
1
2.2
2.1
4.2
4.3
!
2x
SW4
M
D
=2 Nm
1
RL
M
B
A
B
A
B
A
B
A
A
B
B
A
B
A
B
A
3
C
4.1
AS 2/C-100, …-250, AS 2/R-300, …-700: Disassembling the protective case
Disassembling the
protective case
1. Open the latches
using two slotted
screwdrivers.
2. Remove the front half of
the protective case.
3. Remove the drip tray.
4. If necessary, remove
the back half of the
protective case.
Mount the protective case
in reverse order.
Assembly 31/108
3 842 358 737/2022-08, MIT: SE 2/C-…, SE 2/R-…, Bosch Rexroth AG
ENGLISH