Fig. 17:
358 736-25
SW10
T 40
SW10
(2x)
AS 2/C-100
AS 2/R-300
AS 2/C-250
AS 2/R-700
M = 25 Nm
D
AS 2/C-100
AS 2/R-300
AS 2/C-250
AS 2/R-700
B
B
A
M
D
= 2,5 Nm
SW4
Assembling the drive module AS 2/C-100, …-250, AS 2/R-300, …-700
Please note:
• Do not lift the drive
module at the drive shaft.
• The drive module must
be disassembled for
mounting on the section.
• For heavy drive modules
and drive modules with
large dimensions, use
assembly aids and/or
lift aids (pallet truck /
crane).
1. Remove the gear motor.
2. Remove the drive
train (A).
3. Install the drive
heads (B) at the end
of the section.
32/108 Assembly
Bosch Rexroth AG, MIT: SE 2/C-…, SE 2/R-…, 3 842 358 737/2022-08
To Next Page
Loading...
