1.2 Required and supplementary documentation
Only start up the product if the documentation marked with the
book symbol
is available and you have understood and followed the
instructions in it.
Table 1: Required and supplementary documentation
Title Document number Document type
Employee safety training 3 842 527 147
Declaration of incorporation (AS 2/C-…, KU 2-…)
Declaration of incorporation (AS 2/R-…)
3 842 358 232
3 842 358 415
MTpro
1
) 3 842 539 057 With spare parts list
1
) Download at: www.boschrexroth.com/mtpro
2
) All documents are also available for download from the media directory:
www.boschrexroth.com/mediadirectory
1.3 Presentation of information
Standardized safety instructions, symbols, terms and abbreviations are used so
that you can use this documentation to work quickly and safely with your product.
These are explained in the following sections to help you understand them better.
1.3.1 Safety instructions
This document contains safety instructions in chapter 2.6 "Product-specifi c safety
instructions" and chapter 3 "General notes on property and product damage",
as well as before any sequence of actions or any required action which involves
a risk of personal injury or property damage. Be sure to observe all safety
precautions.
Safety instructions are set out as follows:
SIGNAL WORD
Type and source of danger!
Consequences of non-compliance
Measures to prevent danger
…
• Warning sign: Points out the danger
• Signal word: Indicates the severity of the danger
• Type and source of danger: Indicates the type and source of the danger
• Consequences: Describes the consequences of non-compliance
• Prevention: States how the danger can be avoided
About this documentation 7/108
3 842 358 737/2022-08, MIT: SE 2/C-…, SE 2/R-…, Bosch Rexroth AG
ENGLISH
To Next Page
Loading...
